Are you looking this product? Now you can get product in EXE Format,just following step by step until finish you will be guided downloading this book for free, Enjoy it.
1. What is your MPAN?
An MPAN (Meter Point Administration Number) is a unique number to the property. It is found on the electricity bill issued issue by the supplier. This is sometimes called a Supply Number but it should not be confused by the customer reference number. It is not displayed on the actual meter. Â The full MPAN is 21 digits in length and should be printed on the electricity bill for the supply.Â
Suppliers can also obtain the MPAN on the behalf of customers by using the MPAS Â Customers wishing to find out their MPAN you can also call their local Distribution Company and they will be able to provide the 13 digit MPAN core over the phone. Â In most cases this should be enough information to arrange the transfer of an electricity supply, it is also worthwhile asking that they send the information by post - that way you will also receive the full MPAN.
2. What does the MPAN mean?
a) Profile Class  Every property has a profile class.  Profile classes are used where half-hourly metering is not installed and provides the electricity supplier with an expectation as to how electricity will be consumed throughout the day.
01 Domestic Unrestricted
02 Domestic Economy 7
03 Non-Domestic Unrestricted
04 Non-Domestic Economy 7
05 Non-Domestic Maximum Demand 0-20% Load Factor
06 Non-Domestic Maximum Demand 20-30% Load Factor
07 Non-Domestic Maximum Demand 30-40% Load Factor
08 Non-Domestic Maximum Demand >40% Load Factor
Your profile class will give suppliers an idea of your consumption patterns and your efficiency at using the energy you consume. This in turn is reflected in the standing charge and unit rates that you will be charged. As a general rule, higher usage needs a higher profile.  So shops, small offices, etc are fine on an 03 / 04 tariff, whereas larger users are better off on higher numbers, 05 to 08, and the higher the number the better (lower unit costs).  If there has been a significant change is usage, with may be worth asking your suppler to review your profile.
b) Meter Time Switch Code (MTC)
The Meter Time Switch Code indicates how many registers (set of meter reads or dials) the electricity meter has and what times they will operate during the day. The Meter Time Switch Code will show if the meter has two registers, one which records day consumption, the other night. Numbers 501 - 799 indicate that there are related meters.
c)Line Loss Factor (LLF)
The Line Loss Factor code stipulates the expected costs the distribution company will charge the supplier for using the cables and network in the region. This Line Loss Factor code will also indicate to the electricity supplier the potential charges incurred, due to loss of energy incurred whilst getting the electricity supply to the meter.
d) Distributor ID
The Distributor ID will identify the local Distribution Company for the electricity supply. The Distribution Company is responsible for management of the distribution system and electricity wires, which transports the electricity to the meter.
10 - Eastern Electricity
11 - East Midlands Electricity
12 - London Electricity
13 - MANWEB
14 - Midlands Electricity
15 - Northern Electricity
16 - NORWEB
17 - Scottish Hydro-Electric
18 - Scottish Power
19 - Seeboard
20 - Southern Electricity
21 - SWALEC
22 - SWEB
23 - Yorkshire Electricity
e) Meter Point ID Number
This is a unique number within the distribution area to identify the actual meter.
f) Check Digit
This number is calculated from the Distributor ID and Meter Point ID Number to provide a check digit that other systems can use to validate the MPAN. Â
